The device will display the file browser. Select the .bin file from your USB drive. Press to start the upgrade process.
Extract the archive on your computer first. Move only the raw .bin file directly onto the main screen of your USB drive. The Screen Froze Mid-Update Cause: Data corruption or hardware communication failure.
Insert the prepared USB flash drive into the USB port located on the side of the meter. Power on the device. Step 3: Navigate the System Menu Press the button on the keypad. Satlink Ws-6979 Software Upgrade
Prevents random freezes and optimizes battery consumption during long field tasks. Essential Prerequisites Before Upgrading
Ensure the device is fully functional before beginning. The device will display the file browser
Turn on your meter, go to System Setup , and select Version . Note down the current software version for reference. Step-by-Step Firmware Installation Process
Copy the downloaded firmware file (e.g., ws6979_v2.0.upd ) directly to the root directory of the SD card. Do not put it inside a folder. Extract the archive on your computer first
Downloaded from the official Satlink website or a trusted source. Battery Power: Ensure your Satlink is charged above to avoid power loss during the update. Step-by-Step Software Upgrade Procedure (USB Method)
A progress bar will appear on the screen. Once completed, the meter will automatically reboot. Troubleshooting Common Upgrade Issues
Look for an option labeled "Software Upgrade" or "USB Upgrade." Select Firmware File: The device should detect the file on your USB drive. Select it to begin the process. Flash the Firmware:
