The Jalopy JournalIn the Flash Settings panel, choose your exact NAND manufacturer (e.g., Toshiba) detected by your earlier ChipGenius scan.
It is completely normal for a high-performance USB 3.0 drive to feel warm during heavy read/write cycles. However, there is a fine line between a functioning hot controller and a fatal hardware malfunction. 1. Physical Discomfort (The Touch Test)
🔥 Why Your Phison PS2251-07 (PS2307) Runs HOT – And How to Cool It Down
(e.g., v3.71) for your drive, if you tell me the manufacturer. Forums where users have successfully repaired their drives. Better-cooled USB drive alternatives . Which of these would be most helpful? Phison PS225107 USB Drive. - HDD GURU FORUMS
The drive should now behave like a brand-new USB flash drive, free from write protection and fully writable.
Operating the bare PCB allows air to hit the Phison chip directly, drastically lowering operational temperatures during emergency data recovery.
The drive may enter a "MaskROM" mode, showing up in Device Manager as "2307 PRAM" or a generic Phison device with 0MB capacity.
Remove your needle exactly after plugging the drive in. The drive status light will stay solidly lit, and it will now show up in Windows as an uninitialized generic device, breaking the thermal bootloop. Step 4: Executing the Flash Operation
If the drive continues to run hot even after a re-flash, the controller may be physically damaged from excessive heat.
