To program the GM360, you typically need the official (often identified by part numbers like ENLN4115U ).
If you have recently acquired a Motorola GM360 (or its close relative, the GM380) for your vehicle, site comms, or amateur radio setup, you’ve likely hit the first major roadblock:
The Motorola GM360 is a versatile, high-performance mobile two-way radio widely used in commercial, public safety, and industrial applications. To unlock its full potential—including managing channels, configuring signaling protocols, and adjusting power levels—you must use the dedicated Motorola GM360 programming software.
CPS is the essential software that allows you to read, configure, and write the operating parameters of your GM360. With it, you can adjust channels, frequencies, squelch tones (CTCSS/DCS), power output levels, and assign functions to programmable buttons. motorola gm360 programming software
Are you trying to set up a specific feature like ? Tell me your goal and I can provide the exact steps.
Open the CPS. Navigate to File > Set COM Port (or similar menu depending on the software version) and select the COM port number identified in Device Manager. Core Programming Procedures
The CPS version you are using does not match the geographic region (EMEA, AA, LA, AZ) or firmware version of the radio. To program the GM360, you typically need the
Displays the model number, serial number, and current firmware version.
Turn on the radio and ensure it completes its self-test beep. Step 2: Configure COM Ports Open your Windows .
The GM360 was made during the transition. If you are using this on a business band (VHF/UHF), ensure your software allows you to set "12.5 kHz" (Narrow) bandwidth, as "25 kHz" (Wide) is no longer legal for most commercial use in the US and EU. CPS is the essential software that allows you
Navigate to the or Channel Assignment folder in the left-hand tree menu. Here you can edit:
, and GM380 mobile radios. It is primarily a legacy Windows-based application.