Din 5464 Standard Pdf -

: The primary source for German standards.

Working Committee "Splined joints" (NA 060-34-31 AA) in the Mechanical Engineering Standards Committee (NAM) ICS Classification: 21.120.10 (Shafts and couplings)

If your project requires a European or German-engineered spline connection, is likely the correct standard. din 5464 standard pdf

To choose the correct component geometry, it is important to understand where DIN 5464 sits compared to similar standards: Series Type Profile Geometry Common Application Heavy Series Straight-sided (0° flank angle) High torque, thin-walled hubs, heavy machinery DIN ISO 14 (formerly DIN 5462/5463) Light/Medium Series Straight-sided (0° flank angle) General automotive, low-to-medium torque DIN 5480 Involute Splines 30°/37.5°/45° Pressure angle

: Platforms like Intertek Inform and MyStandards also provide immediate PDF downloads for professional use. Summary Table DIN 5464 Specification Series Heavy Series (6 or 10 splines) Flank Angle Status Active (Current Edition: 2010-03) Primary Use High-torque shaft-hub connections : The primary source for German standards

The PDF will clarify that serrated flanges provide "locking" action against hard steel surfaces. Non-serrated flanges are used for soft materials (aluminum, plastic) or where the surface must not be scratched.

This standard is frequently used in European machinery design for: Summary Table DIN 5464 Specification Series Heavy Series

: Primarily flank-centered, though diameter centering is possible.

The standard's current status is "Current," as outlined in its 2010 edition, and it is available in both German and English. It is developed and maintained by the at DIN, specifically the "Splined Joints" working group.

Manufacturers use and double flank rolling testers to verify splines. The tolerances for these gauges are also specified in Annex A of the DIN 5464 standard.

: Compared to the standard DIN ISO 14 , DIN 5464 splines feature more teeth, allowing them to distribute torque over a larger surface area.