Exclusive ((top)): Digi Sm500 Scale User Manual

Provides detailed registration steps and basic handling. Available at 9line.ru Programming Manual

Allows the scale to function as a standalone point-of-sale checkout node. 2. Initial Setup and Calibration

Locate the small access panel on the underside or rear casing of the scale. Remove the sealing screw and lead wire seal.

Even the most robust equipment experiences occasional hiccups. Here are some of the most common Digi SM-500 Go to product viewer dialog for this item. issues and how to resolve them: Scale Will Not Zero digi sm500 scale user manual exclusive

Place the item on the scale pan. The display will show the weight, unit price, and total price.

Expandable internal memory supporting up to 10,000+ Price Look-Up (PLU) items.

Remove excess weight immediately to prevent load cell damage. Hard Factory Reset Procedure Provides detailed registration steps and basic handling

Use a soft, damp cloth with a mild, non-abrasive cleaner. Never spray liquids directly onto the scale.

| Error Code | Meaning | Exclusive Fix | | :--- | :--- | :--- | | | Overload – Item exceeds max capacity (typically 500g or 5000g model dependent). | Remove weight immediately to avoid sensor damage. Long-term fix: Do not exceed 105% of max. | | LO | Low battery. | Replace batteries. Exclusive: If using AC adapter, LO indicates a dying power supply – replace adapter, not batteries. | | UnSt | Unstable environment – vibration, air flow, or thermal shock. | Move scale away from fans, open windows, or heavy machinery. Wait 30 seconds. | | C Err | Calibration error – weight was removed too early or wrong mass. | Restart calibration. Ensure weight is exactly as requested. | | Err 2 | ADC failure – Analog-to-digital converter fault. | This often resolves by removing batteries + AC for 10 minutes (hard reset). If persists, return for service. | | 0.0 but weight present | Dead zone or sensor stuck. | Tap the pan lightly 5-6 times. Use a can of compressed air to blow under the pan edges. |

The contains detailed hardware-level information. It includes procedures and settings for: Initial Setup and Calibration Locate the small access

Standard Ethernet (TCP/IP), RS-232 serial port, and cash drawer RJ11 interface. Component Location Diagram

on a day-to-day basis is designed to be intuitive, ensuring new staff can be trained quickly. Basic Weighing Procedure

Q: What is the maximum capacity of the Digi SM500 scale? A: The maximum capacity of the Digi SM500 scale is 500g.