Alcor Recovery Tool |work| Page

The drive is "locked" and cannot be formatted or edited.

: Restoring access to a drive that stopped working due to improper removal or electrical surges.

Select (Low-Level Format) if the drive has severe corruption, or High-Level Format for basic structural repairs. BadBlock ECC Engine alcor recovery tool

This tool only works for drives with Alcor Micro chips. It will not work for Phison, Silicon Motion (SMI), or Sandisk controllers.

Download and run ChipGenius . Insert your problematic drive and note the "Chip Part-Number" (e.g., AU6987, AU6998) and the "VID/PID" (Vendor and Product ID). You need these to ensure you download the correct matching tool. The drive is "locked" and cannot be formatted or edited

[Launch AlcorMP] ➔ [Insert USB Drive] ➔ [Configure Setup] ➔ [Execute Start] 1. Environmental Preparation

: Unlike standard Windows formatting, these tools re-initialize the flash memory cells and re-map the file system at the firmware level. BadBlock ECC Engine This tool only works for

. It is primarily used when a USB drive is physically recognized by the computer but unusable due to internal software errors: Fixing "No Media" Errors

A progress bar will cycle through steps: Erase Flash , Analyze Bad Blocks , Write Firmware , and Format . during this phase.

Once you have confirmed you have an Alcor chip, follow these steps: